Customer Support |  Mon–Fri 9am–5pm AEST

Call Us Message Us
A silver Fujifilm X100 held in both hands with the NiSi Lens Hood Kit III square metal hood fitted over the 23mm lens

NiSi for Fujifilm X100

A 49mm thread
on an X100.

Protection for the fixed 23mm lens and a standard 49mm thread on the front, in place of the factory trim ring. Lens Hood Kit III adds a locking square hood and a magnetic metal cap.

  • 49mm front thread
  • 99.3% light transmission
  • 6 X100 bodies
  • 2 finishes
Shop X100 filters

Before you choose

Choose your kit

Clear glass, the whole front end, or the look.

The first two start with the same NC UV Filter II and its 49mm front thread, and Lens Hood Kit III adds the locking square hood and the magnetic metal cap. The other two put the look on the camera instead of clear glass. All four go on in place of the factory trim ring, and all four are made in silver and in black to match.

The NiSi NC UV Filter II with 49mm front thread in silver and in black, standing side by side on whiteSilver or black

NC UV Filter II with 49mm Front Thread

One machined part that threads straight onto the camera where the decorative trim ring was. It protects the fixed lens, clears atmospheric haze, and puts a standard 49mm thread on the front of a compact camera that never had one.

What it gives you

  • A 49mm front thread for any standard filter
  • Double-sided nano coating, 99.3% light transmission
  • Oil and water resistant outer surface
  • Clearance for the lens barrel to extend
  • Works with the original Fujifilm lens cap

Fits the Fujifilm X100, X100S, X100F, X100T, X100V and X100VI.

NC UV Filter II, Silver NC UV Filter II, Black
The three silver parts of the NiSi Lens Hood Kit III on white: the magnetic metal lens cap, the square metal lens hood and the NC UV filterThree parts

Lens Hood Kit III

The same NC UV filter and 49mm thread, plus a square metal hood held by a new patented locking mechanism and a machined metal lens cap that holds itself on magnetically. The classic rangefinder profile, in matched metal.

In the kit

  • NC UV filter with a 49mm front thread
  • Square metal lens hood, locking
  • Magnetic metal lens cap
  • Clearance for the lens barrel to extend
  • Original Fujifilm cap fits with the hood off

Fits the Fujifilm X100, X100S, X100F, X100T, X100V and X100VI.

Lens Hood Kit III, Silver Lens Hood Kit III, Black
The NiSi Black Mist 1/4 for the Fujifilm X100 series in a silver frame, a tapered ring engraved FOR FUJI X100 SERIES and Black Mist 1/4Silver or black

Black Mist 1/4

The cinematic look, with no clear glass in front of it. It lowers contrast and diffuses the highlights, so light sources keep a strong centre and bloom softly at the edge, and it goes on in place of the trim ring exactly as the NC UV filter does.

What it gives you

  • Lower contrast, highlights and shadows balanced
  • A film-like bloom around any direct light source
  • Softer wrinkles and blemishes on skin
  • Threads on in place of the factory trim ring
  • No separate filter adapter needed

Fits the Fujifilm X100, X100S, X100F, X100T, X100V and X100VI.

Black Mist 1/4, Silver Black Mist 1/4, Black
The NiSi Allure Soft White for the Fujifilm X100 series in a silver frame, a tapered ring engraved FOR FUJI X100 SERIES and ALLURE SOFTSilver or black

Allure Soft White

The softer, brighter glow. It diffuses the strong light entering the lens with fine particles and spreads it evenly, so the picture turns soft and ethereal while keeping its clarity and detail. It mounts the same way, in place of the trim ring.

What it gives you

  • A diffused glow from strong light
  • Little loss of clarity or detail
  • Softer skin, blemishes covered, for portraits
  • Threads on in place of the factory trim ring
  • No separate filter adapter needed

Fits the Fujifilm X100, X100S, X100F, X100T, X100V and X100VI.

Allure Soft White, Silver Allure Soft White, Black

Still deciding? The filter on its own is the smallest way to protect the lens and open up the 49mm thread, and the kit is the one to pick if you want the square hood and a cap that never needs lining up: on those two the glass and the coatings are identical. Black Mist and Allure Soft White are the ones to pick if you want the diffusion built into the camera rather than screwed in front of it. Ask our team.

How it fits

Three turns, then shoot.

No adapter tube and no step ring. The filter goes exactly where the decorative trim ring was, and the finished result sits almost flush with the lens barrel.

Take the trim ring off

The decorative ring around the front of the X100 lens unscrews by hand. Put it somewhere safe. Nothing else on the camera changes.

Thread the filter on

The NC UV Filter II threads straight into its place. It is a single machined unit, so there is no adapter to fit first and nothing extra to lose.

Add a filter, or lock the hood

Screw any standard 49mm filter onto the front, or clamp the square hood on with the locking mechanism and drop the magnetic cap over it.

Both hands holding a silver Fujifilm X100 and lifting the loosened decorative trim ring away from the front of the 23mm lens
Step one: the trim ring unscrews by hand
A thumb and finger threading the NiSi NC UV Filter II onto the front of a silver Fujifilm X100, in the place the trim ring came off
Step two: the filter threads straight into its place
A thumb turning the locking screw that clamps the square NiSi lens hood to the filter on a black Fujifilm X100
Step three: the screw that locks the hood to the filter

Why NiSi

The X100 lens cannot be replaced.

It is fixed, so damage to the front element is not something you solve by swapping in another piece of glass. Everything here starts from that.

01 / 08

Straight onto the camera

Many protective solutions for the X100 want an adapter ring first, which adds length, cost and one more part to misplace. This one is a single machined unit that takes the place of the factory trim ring, so fitting it takes seconds and the camera keeps its pocketable shape.

A silver Fujifilm X100 held up in one hand against a blue sky and out-of-focus trees, the NiSi filter fitted on the front of the lens

02 / 08

Any 49mm filter screws on

The headline change in this version is the 49mm thread cut into the front of the frame. A circular polariser, a neutral density, a black mist or a close-up lens now joins the stack with no step rings and no extra bulk hanging off the front.

A black Fujifilm X100 held in one hand with the NiSi NC UV Filter II held in the other, about to be threaded on

03 / 08

Coated on both faces

A multi-layer low-reflection nano coating on both glass surfaces passes 99.3% of incoming light. Reflections that would otherwise bounce between filter and lens are held down, so shooting into street lights or a low sun stays clean and colour rendition stays neutral.

The silver NiSi NC UV Filter II standing on edge on white, showing the coated glass and the internal 49mm thread

04 / 08

Your Fujifilm cap still fits

The lens cap that came with the camera seats directly on the filter, so there is no substitute to carry and nothing in your existing kit is left redundant. With Lens Hood Kit III, take the hood off and the original cap goes on as before.

A silver Fujifilm X100 held in both hands with the original Fujifilm lens cap seated on the NiSi filter

05 / 08

Room for the barrel to extend

The X100 lens barrel moves forward as it focuses close, and a filter that sits too deep will stop it short. Both kits are built with dedicated internal clearance for that movement, so you keep the camera's full close-focusing range.

Close-up of the Fujifilm X100 lens barrel with the silver NiSi NC UV Filter II fitted flush on the front

06 / 08

Rain beads. Fingerprints wipe.

The outer surface carries a hydrophobic and oleophobic layer, so water rolls away instead of drying into spots, and fingerprints, sunscreen and sea spray lift off with one pass of a microfiber cloth. It matters most on the days you are actually out shooting.

Water beading into three droplets on the glass of the black NiSi NC UV Filter II

07 / 08

The hood locks, it does not push on

Rather than a felt-lined friction fit, the square metal hood engages a patented locking mechanism on the filter and clamps solid. It will not rotate out of square, creep loose in a bag, or shift when you lift the camera by its strap.

A silver Fujifilm X100V hanging from two fingers by its square NiSi lens hood alone, above an out-of-focus city skyline at dusk

08 / 08

A cap that snaps on

The machined metal cap holds itself to the front of the kit magnetically. There is no clip to line up and no friction fit to work loose, so it comes off in one motion when a picture appears and goes back the same way when you are done.

A hand holding the square magnetic metal lens cap beside a black Fujifilm X100 on a stone ledge at dusk

Closer look

Machined to match the camera.

Our own studio photography of the two current X100 kits, in both finishes.

The silver NiSi NC UV Filter II with 49mm front thread, three quarter view on white
NC UV Filter II, silver
The black NiSi NC UV Filter II with 49mm front thread, three quarter view on white
NC UV Filter II, black
Engraving detail on the slim aluminium frame of the silver NiSi NC UV Filter II, reading NC UV 49mm
Engraved frame, slim and discreet
The three black parts of the NiSi Lens Hood Kit III on white: magnetic metal cap, square lens hood and NC UV filter
Lens Hood Kit III, the three parts
A black Fujifilm X100 with the NiSi square lens hood fitted, standing beside three 49mm NiSi circular filters
Hood on, with 49mm filters alongside
Both finishes of the NiSi Lens Hood Kit III laid out on white, the silver parts and the black parts side by side
Both finishes, part for part

Specifications

The numbers.

NC UV Filter II with 49mm Front Thread
FitsFujifilm X100, X100S, X100F, X100T, X100V and X100VI
MountingThreads onto the camera in place of the factory trim ring, no adapter
Front thread49mm, standard
Light transmission99.3%
CoatingMulti-layer low-reflection nano coating on both glass surfaces, hydrophobic and oleophobic outer layer
GlassUltra-high-definition optical glass, absorbs ultraviolet light
FrameSlim anodised aluminium
Lens capThe original Fujifilm X100 series lens cap seats directly on the filter
FinishesSilver (FJ-15) and black (FJ-16)
Product codesNISI-X100VI-SIL-II-49 (silver), NISI-X100VI-BLK-II-49 (black)
Barcodes6978079436041 (silver), 6978079436034 (black)
Lens Hood Kit III
FitsFujifilm X100, X100S, X100F, X100T, X100V and X100VI
In the kitNC UV filter with a 49mm front thread, square metal lens hood, magnetic metal lens cap
HoodMachined metal, held by a patented locking mechanism that clamps to the filter
Lens capMachined metal, magnetic
Front thread49mm, standard
Light transmittance99.3%
CoatingMulti-layer nano coatings, hydrophobic and oleophobic outer layer
Close focusDedicated internal clearance for the extending lens barrel
Original capFits the UV filter with the hood removed
FinishesSilver and black
Product codesNIM-X100-UV49HOODCAPIII-SIL (silver), NIM-X100-UV49HOODCAPIII-BLK (black)
Barcodes6978079436065 (silver), 6978079436058 (black)

Questions

Before you buy.

Which Fujifilm cameras does this fit?

The X100, X100S, X100F, X100T, X100V and X100VI. Every X100 body shares the same fixed 23mm f/2 lens, and both kits are machined to match it.

Do I need an adapter ring?

No. The NC UV Filter II is a single machined part that threads directly onto the camera in place of the factory trim ring. The same is true of the Black Mist 1/4 and the Allure Soft White made for the X100 series: each replaces the trim ring and goes straight on. There is no adapter tube to buy, fit or misplace, and fewer parts means fewer surfaces for dust to settle between.

What can I screw onto the 49mm thread?

Any standard 49mm filter: a circular polariser, a neutral density, a black mist or a close-up lens. It threads onto the front of the filter, so the protection stays in place and nothing has to come off the camera first.

Will the original Fujifilm lens cap still fit?

Yes. The cap that came with the camera seats directly on the filter. With Lens Hood Kit III, take the hood off and the original cap fits as before.

Can I still focus close with the filter fitted?

Yes. The X100 lens barrel extends as it focuses close, and both kits are built with dedicated internal clearance for that movement, so you keep the camera's full close-focusing range with the filter and the hood on.

How does the square hood attach?

Lens Hood Kit III uses a patented locking mechanism that clamps the metal hood to the filter, rather than a felt-lined friction fit. It will not rotate out of square or creep loose in a bag.

Should I choose silver or black?

Both products are made in both finishes, anodised or machined to sit against the silver or the black X100 body. The glass and the coatings are identical, so it is purely a question of which camera you own.

How do I clean the glass?

The outer surface is hydrophobic and oleophobic, so rain beads and rolls off rather than drying into spots, and fingerprints and grease sit on the surface instead of soaking in. One pass with a microfiber cloth returns it to clean.

Showing all 12 results

  • PRE-ORDER NEW RELEASE NiSi Lens Hood Kit III for Fuji X100 Series (Silver) – NC UV Filter with 49mm Filter Adapter, Square Lens Hood and Magnetic Lens Cap for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI Filter Systems for Compact Cameras | NiSi Filters Australia | 2

    NiSi Lens Hood Kit III for Fuji X100 Series (Silver) – NC UV Filter with 49mm Filter Adapter, Square Lens Hood and Magnetic Lens Cap for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI

    $169.00 inc. GST     Add to cart
  • PRE-ORDER NEW RELEASE NiSi Lens Hood Kit III for Fuji X100 Series (Black) – NC UV Filter with 49mm Filter Adapter, Square Lens Hood and Magnetic Lens Cap for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI Filter Systems for Compact Cameras | NiSi Filters Australia |

    NiSi Lens Hood Kit III for Fuji X100 Series (Black) – NC UV Filter with 49mm Filter Adapter, Square Lens Hood and Magnetic Lens Cap for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI

    $169.00 inc. GST     Add to cart
  • NiSi NC UV Filter II with 49mm Front Thread for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI (Silver) Filter Systems for Compact Cameras | NiSi Filters Australia |

    NiSi NC UV Filter II with 49mm Front Thread for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI (Silver)

    $75.99 inc. GST     Add to cart
  • NiSi NC UV Filter II with 49mm Front Thread for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI (Black) Filter Systems for Compact Cameras | NiSi Filters Australia |

    NiSi NC UV Filter II with 49mm Front Thread for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI (Black)

    $75.99 inc. GST     Add to cart
  • NiSi Highlight Diffusion Filter (HDF) for Fujifilm X100 Series (Silver) Filter Systems for Compact Cameras | NiSi Filters Australia |

    NiSi Highlight Diffusion Filter (HDF) for Fujifilm X100 Series (Silver)

    $119.00 inc. GST     Add to cart
  • NiSi Highlight Diffusion Filter (HDF) for Fujifilm X100 Series (Black) Filter Systems for Compact Cameras | NiSi Filters Australia |

    NiSi Highlight Diffusion Filter (HDF) for Fujifilm X100 Series (Black)

    $119.00 inc. GST     Add to cart
  • NiSi Black Mist 1/4 for Fujifilm X100 Series (Silver Frame) Circular Black Mist | NiSi Filters Australia |

    NiSi Black Mist 1/4 for Fujifilm X100 Series (Silver Frame)

    $119.00 inc. GST     Add to cart
  • NiSi Black Mist 1/4 for Fujifilm X100 Series (Black Frame) Circular Black Mist | NiSi Filters Australia |

    NiSi Black Mist 1/4 for Fujifilm X100 Series (Black Frame)

    $119.00 inc. GST     Add to cart
  • NiSi Allure Soft White for Fujifilm X100 Series (Silver Frame) Filter Systems for Compact Cameras | NiSi Filters Australia |

    NiSi Allure Soft White for Fujifilm X100 Series (Silver Frame)

    $99.00 inc. GST     Add to cart
  • NiSi Allure Soft White for Fujifilm X100 Series (Black Frame) Filter Systems for Compact Cameras | NiSi Filters Australia |

    NiSi Allure Soft White for Fujifilm X100 Series (Black Frame)

    $99.00 inc. GST     Add to cart
  • AVAILABLE ON BACKORDER NiSi Color Rings Set for Fujifilm X100 series (Set of 4 – Gold, Rose Gold, Blue and Green) Filter Systems for Compact Cameras | NiSi Filters Australia |

    NiSi Color Rings Set for Fujifilm X100 series (Set of 4 – Gold, Rose Gold, Blue and Green)

    $49.99 inc. GST     Add to cart
  • NiSi Filter System for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI (Professional Kit) Clearance Sale | NiSi Filters Australia |

    NiSi Filter System for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI (Professional Kit)

    Original price was: $115.00.Current price is: $57.50. inc. GST     Add to cart
Continue Shopping →
Item added to cart.
0 items - $0.00
Checkout
Shopping cart0
There are no products in the cart!
Continue shopping
0